The use of industrial tablet computers is becoming more and more popular, but do you know what problems should be paid attention to when using it? Now I will give you a detailed introduction to the specific matters that you should pay attention to when using tablet computers.
1. Industrial tablet computers should be placed in a clean room. Dust will have an adverse effect on almost all the accessories of the computer, thereby shortening the service life of the computer and affecting its performance. Although the protection level of the tablet computer is IP65, it can prevent dust, but the sticking of dust will have an adverse effect on the heat dissipation and the touch effect of the industrial display. When we usually use it, we can effectively increase the service life of industrial tablet computers by doing a good job of cleaning the environment in which the tablet computer is used.
2. In a dry environment, beware of the influence of static electricity on industrial tablet computer accessories. If you need to directly touch the circuit board, please discharge yourself first, such as touching the table with your hands; or take other insulation measures, such as wearing anti-static gloves, anti-static wristbands, etc.
3. The industrial tablet computer should be placed in a spacious space, and the heat dissipation space should be reserved around it, and it should not be mixed with other sundries.
4. No magnetic field is allowed around the industrial tablet computer. Magnetic fields will have a serious impact on industrial displays, CPUs, hard drives, etc., thereby affecting the performance of industrial tablet computers.
5. Do not shut down or power off the hard disk when reading.
6. Do not place a teacup on the table of an industrial tablet computer, let alone place it on an industrial host or industrial display. Although the protection level is high, once water enters, the consequences are very serious. We should try our best to avoid such things happen.
7. Do not use alcohol or washing powder to wipe the screen of industrial monitors. If necessary, you can use clean water, but the clean water must be absorbed on paper towels or rags. Do not let the clean water stay for too long, otherwise it will have the effect of the touch screen. Therefore, it is recommended to use the cleaning agent provided by the manufacturer or purchase a screen cleaning agent that meets the requirements for cleaning.
8. When working with industrial tablet computers, do not move the mainframe or make violent collisions with the mainframe at will. This is a very dangerous action for the hard disk.
9. Clean the power supply, inside the case, industrial display, keyboard, mouse, etc. regularly. If it is inconvenient to deal with it yourself, please ask a professional to complete it. There are high-voltage circuits in industrial displays. If you are not a professional, you must not act recklessly. Safety is the most important.
10. When the tablet is turned on, do not plug or unplug accessories or interfaces (except for devices that support hot plugging), otherwise, it may cause serious consequences of burning related chips or circuit boards.
11. Don't switch on and off frequently. The computer should be switched on and off every time, such as three minutes.
12. Keep all the manuals of the industrial panel computer, especially the main board manual, in case of failure.
13. The chassis of the industrial tablet computer cannot be disassembled at will, because it will cause the inclusion of debris and other conductors in the chassis, which will easily cause the short circuit of the board in the chassis, which will cause serious consequences.
14. If the industrial tablet computer is not used for a long time, it is recommended that you start and run it regularly to get rid of the moisture inside, otherwise, it may affect the normal startup of the tablet computer.
